Recipe View

DADA2 based data analysis.

2 results • updated 4.1 years ago by Bioinformatics Admin

DADA2 based data analysis.

This recipe reads in fastq files and applies filtering & trimming parameters to clean the data. Then an error learning and denoising algorithm is applied using the dada2 R package, followed by taxonomy assignment. Finally, a few demo plots are created with the phyloseq package.

Copy recipe

You need write access to the project to edit.

## Cleaning and filtering 16S files in dada2; demo with SRA data

# input: path to fastq files, other filtering/trimming parameters
# output: folder with filtered fastq files


# load the R packages
require(dada2)
require(phyloseq)

## ---- setVariables ----

# path to directory that contains fastq files
PATH = "/export/sra/"

# desired SRA numbers
SRA = list.files(PATH, pattern = ".fastq")

# choose 16S reference database
REF_FILE = "SILVA"

if(REF_FILE == "SILVA") {
  
  # choose SILVA path
  DBPATH = "/export/refs/silva/silva_nr_v132_train_set.fa.gz"
} else if(REF_FILE == "GREENGENES") {
  
  # choose GREENGENES path
  DBPATH = "/export/refs/green/green_gene_13_8_train_set_97.fa.gz"
} else {
  
  # error if neither database is chosen
  stop("Incorrect database option.")
}


# paired end characterization; most Illumina files are sample names + "_R1_001.fastq" for forward reads
# however, sequences downloaded from NCBI have patterns: "_1.fastq" for forward and "_2.fastq" for reverse
PATTERNF = "_1.fastq"
PATTERNR = "_2.fastq"

# Quality cut: "Truncate reads at the first instance of a quality score less than or equal to truncQ"
TRUNCQ = 0

# Length cut: "Truncate reads after `trunclen` bases; reads shorter than this are discarded"
# NOTE: if paired-end, need two values (one for forward and one for reverse)
TRUNCLEN = c(0, 0)

# Head trim: "Number of nucleotides to remove from the start of each read"
TRIMLEFT = 0

# Tail trim: "Number of nucleotides to remove from the end of each read"
TRIMRIGHT = 0

# Minimum length: "Remove reads with length less than minLen" -- this happens AFTER other trims/truncations
MINLEN = 100

# Maxmimum N: "After truncation, sequences with more than `maxN` are discarded"
# NOTE: dada2 does not allow Ns
MAXN = 0

# Minimum quality: "After truncation, reads contain a quality score less than `minQ` are discarded"
MINQ = 0

## ---- getFiles----

# are files already split? 
if(any(grepl(PATTERNF, SRA))) {
  
  # find forward and reverse files
  fwd <- SRA[grep(PATTERNF, SRA)]
  rev <- SRA[grep(PATTERNR, SRA)]
  
  # get file paths
  fwdFiles <- paste0(PATH, fwd)
  revFiles <- paste0(PATH, rev)
} else {  # if files are not split, get path
  
  # get forward files
  fwdFiles <- paste0(PATH, SRA, PATTERNF)
  # get reverse files
  revFiles <- paste0(PATH, SRA, PATTERNR)
  
}

# error catch
if(length(file(fwdFiles[1])) == 0) {
  
  stop("cannot read forward file path")
  
} 
# error catch
if(length(file(revFiles[1])) == 0) {
  
  stop("cannot read reverse file path")
}

# check to make sure that the lengths of both files are the same
if(length(fwdFiles) != length(revFiles)) {
  
  stop("There is an unequal number of forward and reverse files")
}

# get sample names
fwdNames <- sapply(strsplit(basename(fwdFiles), PATTERNF), `[`, 1)
revNames <- sapply(strsplit(basename(revFiles), PATTERNR), `[`, 1)

# error catch if unordered
if(any(!fwdNames %in% revNames)) {
  
  stop("forward and reverse files are out of order")
  
}
### ---- filterAndTrim ----

# create subdirectory for filtered files
filtForward <- file.path("./filtered", paste0(fwdNames, "_F_filt.fastq.gz"))
filtReverse <- file.path("./filtered", paste0(revNames, "_R_filt.fastq.gz"))


# filter and trim
cleaned <- filterAndTrim(fwd = fwdFiles, rev = revFiles,
                         filt = filtForward, filt.rev = filtReverse,
                         # add parameters that the user selected in previous chunk
                         truncQ = TRUNCQ,
                         truncLen = TRUNCLEN,
                         trimLeft = TRIMLEFT,
                         trimRight = TRIMRIGHT,
                         maxN = MAXN,
                         minLen = MINLEN,
                         minQ = MINQ
)

# track how many reads were removed during filtering process
write.table(cleaned, file = "./filtered/filteredReads.txt", sep = "\t")


## ---- checkFilteredFiles ----

# path to filtered and cleaned reads
CLEANEDPATH = "./filtered/"

# pattern that specifies which reads are forward or reverse
# if single-read pairs, only specifyforward 
FILTEREDF = "_F_filt.fastq.gz"
FILTEREDR = "_R_filt.fastq.gz"


## ---- dada2 ----

# get forward and reverse reads
forward <- sort(list.files(CLEANEDPATH, pattern = FILTEREDF, full.names = TRUE))
reverse <- sort(list.files(CLEANEDPATH, pattern = FILTEREDR, full.names = TRUE))

# check to make sure that the lengths of both files are the same and that they match
fwdNames <- sapply(strsplit(basename(forward), FILTEREDF), `[`, 1)
revNames <- sapply(strsplit(basename(reverse), FILTEREDR), `[`, 1)
if(length(fwdNames) != length(revNames)) {
  stop("The number of forward and reverse files do not match.")
} else {
  
  if(any(!fwdNames%in% revNames)) {
    
    stop("Forward and reverse reads are out of order.")
  }
}

# perform error learning
errF <- learnErrors(forward, multithread = FALSE)
errR <- learnErrors(reverse, multithread = FALSE)

# perform denoising
dadaForward <- dada(forward, err = errF, multithread = FALSE)
dadaReverse <- dada(reverse, err = errR, multithread = FALSE)

# merge paired reads
mergers <- mergePairs(dadaF = dadaForward,
                      derepF = forward,
                      dadaR = dadaReverse,
                      derepR = reverse,
                      verbose = TRUE)

# construct sequence table of ASVs
seqtab <- makeSequenceTable(mergers)

# remove chimeras
seqtab.nochim <- removeBimeraDenovo(seqtab, 
                                    method = "consensus",
                                    multithread = FALSE,
                                    verbose = FALSE)

# assign taxonomy
taxa <- assignTaxonomy(seqtab.nochim, DBPATH, multithread = FALSE)

# OUTPUT: write ASV table and TAXA table to file
write.table(seqtab.nochim, file = "AmpliconSequenceVariableTable.txt", sep = "\t")
write.table(taxa, file = "TaxonomyTable.txt", sep = "\t")

### ---- phyloseq ----

# create demo sample data
sampleDF <- data.frame(sample = sapply(strsplit(rownames(seqtab.nochim), "_"), `[`, 1),
                       treatment = c("T", "T", "C", "C", "T"))
rownames(sampleDF) <- rownames(seqtab.nochim)

# note that we do not have sample data right now
ps <- phyloseq(otu_table(seqtab.nochim, taxa_are_rows=FALSE), 
               sample_data(sampleDF), 
               tax_table(taxa))

# replace strings of DNA with an ASV sequence 
taxa_names(ps) <- paste0("ASV", seq(ntaxa(ps)))

# plot alpha diversity
# open graphics device
pdf(file = "AlphaDiversity.pdf", width = 4, height = 4)
plot_richness(ps, x="treatment", measures=c("Shannon", "Simpson"), color="treatment")
# close graphics device
dev.off()

## create a beta diversity ordination
# Transform data to proportions as appropriate for Bray-Curtis distances
ps.prop <- transform_sample_counts(ps, function(otu) otu/sum(otu))
ord.nmds.bray <- ordinate(ps.prop, method="NMDS", distance="bray")

# plot the ordination
# open graphics device
pdf(file = "BetaDiversity.pdf", width = 4, height = 4)
plot_ordination(ps.prop, ord.nmds.bray, color="treatment", title="Bray-Curtis NMDS")
# close graphics device
dev.off()

## Abundance barplot by Sample
# open graphics device
# set taxonomy that was chosen
tax = "Phylum"
pdf(file = "AbundanceBarplot.pdf", width = 4, height = 4)
plot_bar(ps, x = "sample", fill = tax, title = "Abundance Barplot by Sample")
# close graphics device
dev.off()

You need write access to the original recipe to edit.

Click the buttons on the right to create new fields.

Add text field Add float field Add data field Add checkbox Add dropdown Add upload field Add integer field Add radio button

Edit the content of each interface element.

[ReferenceDatabase]
label = "16S Reference Database."
display = "DROPDOWN"
help = "Choose a 16S reference database."
choices = [ [ "SILVA", "Silva v.132 Reference Database",], [ "GREENGENES", "Greengenes Reference Database",],]
value = "SILVA"

[minlen]
label = "Minimum read length"
display = "INTEGER"
help = "Enter an integer between 50 and 200."
range = [ 50, 200,]
value = 100

[taxonomy]
label = "Taxonomical rank to report"
display = "DROPDOWN"
help = "Pick taxomomical rank to create reports for."
choices = [ [ "Phylum", "Phylum",], [ "Class", "Class",], [ "Order", "Order",], [ "Family", "Family",], [ "Genus", "Genus",], [ "Species", "Species",],]
value = "Phylum"

[settings.execute]
command = "Rscript recipe.sh"

You need write access to the original recipe to edit.

Name

Recipe display name

Identifier

Unique identifier for the recipe.

Image :

Optional image for the recipe ( 500px Maximum ).

Rank:

Used to order recipes (optional).

Insert Image

From the web

From your computer

Cancel

Back

DADA2 Taxonomy Assignment for 16S

Insert Image